Friday, March 19, 2010

03-12-2010


The caster camber plates installed on both sides.


Above shows the support and mounting bracket for caster camber. (water jet piece)

03-06-2010


Above and below two water jet pieces being drilled. Pieces go on the underside of the shock tower, and bolt through to the caster camber plate.


Suspension mocked up. More bad news: Qa1 struts won't work, not enough compression or travel. QA1 struts can't be modified. I contacted Koni and gave them specs that I needed, and I should have them in 10 weeks.

Thursday, March 18, 2010

03-05-2010

Above and below just getting measurements. I'm not going to flare the wheel wells that much. Looks like 8" wide rims.